SPRAYPAINT MICROWAVE WHITE 250ML (SPRAYMATE)

SPRAYPAINT MICROWAVE WHITE 250ML (SPRAYMATE)

Spraymate® Microwave spray paint is a specially formulated paint used for coating and revamping microwave interiors and exteriors.
Suitable for old and new generation microwave ovens.
The special nozzle allows you to spray while the can is upside down.
This spraypaint is resistant to moisture, fat, food and any other substance heated by the microwave process.

To use Spraymate Microwave White Spray, shake the can vigorously, prepare the surface by cleaning and sanding if needed, and then apply thin, even coats from 20-30 cm away, allowing about 20 minutes between each of the two or three coats.

Before you spray
Clean and prepare the surface: Wipe the microwave clean to remove dirt and grease. If there are rusty spots, you will need to sand them off and apply a primer like Spraymate Red Oxide primer. A light sanding of the entire surface can also improve adhesion.
Mask off areas: Use masking tape to cover any parts of the microwave you don’t want to paint.
Ensure ventilation: Work in a well-ventilated area to allow for proper drying and to avoid inhaling fumes.

During application
Shake the can: Shake the can vigorously for at least one minute until you hear the mixing ball rattle.
Maintain distance: Hold the can upright and spray about 20 to 30 cm away from the surface.
Spray in steady strokes: Use a steady, side-to-side motion, slightly overlapping each stroke to ensure even coverage.
Apply light coats: Apply several thin coats instead of one heavy one to prevent drips and runs.
Wait between coats: Allow about 20 minutes between coats. You may need to apply two or three light coats for full coverage.

After drying and final coat
Boil a cup of water for 5 minutes before warming any food.