SPRAYPAINT CLEAR LACQUER 250ML (SPRAYMATE)

SPRAYPAINT CLEAR LACQUER 250ML (SPRAYMATE)

To use SPRAYMATE Clear Lacquer, first prepare the surface, then shake the can for at least one minute. Hold the can upright 20-30 cm away and apply light, even coats in a steady, back-and-forth motion, overlapping each stroke. Allow about 10-20 minutes between coats to avoid drips.

Step 1: Prepare the surface
Clean the area thoroughly to remove all dirt, grease, and oil.
Sand the surface, if necessary, to create a smooth finish.
Ensure the surface is completely dry before you begin.

Step 2: Shake the can
Shake the can vigorously for at least one minute, or until you can hear the mixing ball rattling.
Do not use the can if the mixing ball does not rattle.

Step 3: Apply the lacquer
Hold the can upright and about 20 to 30 cm from the surface.
Spray in a steady, back-and-forth motion, keeping the can in constant motion and slightly overlapping each stroke to avoid drips and runs.
Apply two or more light coats, waiting 10-20 minutes between each application.

Step 4: Clean up
If the nozzle becomes blocked, invert the can and spray until the nozzle is clear.
Clean up any spills or equipment immediately after use with lacquer thinners.