SPRAYPAINT METALLIC BRONZE 250ML (SPRAYMATE)

SPRAYPAINT METALLIC BRONZE 250ML (SPRAYMATE)

To use SPRAYMATE Metallic Bronze, first clean and prepare the surface by removing dirt, oil, and loose paint. Shake the can vigorously for one minute, hold it 20-30 cm from the surface, and apply light, steady, overlapping coats while keeping the can in motion. For a glossier, more durable finish, apply a clear lacquer on top after the bronze paint has dried.

Step 1: Prepare the surface
Clean the surface: Remove all dirt, grease, oil, and chemical contaminants using a suitable solvent or a soap and water solution. Make sure the surface is completely dry afterwards.
Remove imperfections: Sand down any loose paint and rust using a wire brush or sandpaper. Lightly sand glossy surfaces to help the paint adhere better.

Step 2: Apply the paint
Shake the can: Shake the can vigorously for at least one minute until the mixing ball inside rattles. If the ball doesn’t rattle, do not use the can and contact Spraymate.
Maintain distance: Hold the can upright, about 20-30 cm away from the surface.
Spray in motion: Apply steady, back-and-forth strokes, slightly overlapping each one. Keep the can moving continuously while spraying to avoid drips and runs.
Apply multiple coats: Apply two or more light coats a few minutes apart for the best results.

Step 3: Add a clear coat (recommended)
Apply clear lacquer: After the metallic bronze paint is completely dry, apply a clear lacquer to give the finish a high gloss and prevent tarnishing.