SPRAYPAINT ANTI SLIP 240G (RUSTOLEUM)

SPRAYPAINT ANTI SLIP 240G (RUSTOLEUM)

Rust-Oleum® Anti-Slip creates a non-skid surface on concrete, metal and wood. The fast drying formula dries clear and can be applied to ramps, stairs, railings and more.
Slip resistant coating
Clear finish
For indoor and outdoor use
For best results
Fast drying formula dries crystal clear in as little as 30 minutes.

To apply anti-slip Rustoleum, first prepare the surface, then apply the product according to its specific instructions—either spraying multiple thin coats from 25-40 cm away or rolling it on in one direction. Shake the can thoroughly before use and apply thin, even coats, waiting a few minutes between applications. After use, clear the nozzle with mineral spirits. 

1. Prepare the surface Ensure the surface is clean, dry, and free of any grease or debris.

2. Apply the anti-slip product For spray products: Shake the can vigorously for at least one minute after you hear the ball inside rattle. Continue shaking frequently during use. Hold the can approximately 25–40 cm from the surface. Apply several thin, even coats using a steady back-and-forth motion, keeping the can parallel to the surface. Overlap each stroke to ensure complete coverage and avoid runs or sags. Allow a few minutes between coats.

3. Clean up After use, if using a spray can, turn the can upside down and press the spray button for 2–3 seconds to clear the valve and nozzle. Clean brushes, rollers, and trays according to the product’s instructions. Important tips Apply only when air and surface temperatures are between 10-38 degree Celsius. Wear appropriate protective gear, such as gloves and a mask, especially when spraying. Check the specific product’s instructions for drying times before allowing the surface to be used for light or heavy foot traffic or vehicle traffic.