PRIMER MOULD KILLING 946ML (ZINSSER)

Description:
Zinsser® Mould Killing Primer is a water-based EPA registered fungicidal protective coating that can be used to paint over and kill all existing mould, mildew, moss, fungi, odour causing bacteria and any other fungal organisms.
The Mould Killing Primer contains an EPA registered antimicrobial to prevent the growth of mould, mildew and other fungal organisms on the paint film.
Mould Killing Primer also aides in covering residual microbiological and fungal stains.
Mould Killing Primer is for use on non-porous interior and exterior, residential, commercial, and industrial applications and can be applied in factories, warehouses, storage facilities, refrigerated storage facilities, office buildings, residential living, schools, hospitals, veterinary care facilities, elderly care facilities, prisons and correction facilities, wash houses, restaurants, fitness centres and locker rooms, attics, basements, window frames, bathrooms, wall cavities, baseboards, sub-floors and table tops.
Mould Killing Primer can be used with any topcoat, and is ideal with Zinsser PERMAWHITE®.
Not recommended for new or unpainted aluminium, metal or vinyl siding.

Surface Preparation:
For applications that have existing wet, slimy, heavy soiled, gross filth, overgrowth or loose material on the substrate a pre-cleaning step is required.
Physically or mechanically remove gross filth, heavy soil, overgrowth or loose material including dirt, grease, and oily films before application and ensure the substrate is free of slime or excessive moisture to
ensure long-term adhesion and product performance, particularly on exterior surfaces.
If mould or mildew needs to be removed prior to application remove with a mildew remover that is EPA registered and let dry.

Application:
Mould Killing Primer is a ready to use product. Do not thin, do not dilute and do not mix with water or other chemicals or other paints.
Mix thoroughly.
Do not apply when air or surface temperature is below 50°F (10°C) or when drying conditions are poor.
Use adequate ventilation during application.
Use a brush, roller, or airless sprayer to apply.
Follow the manufacturer’s instructions when using spray equipment.
For airless spraying use a 0.017” to 0.019” tip at 2000 to 2500 psi.
Coverage is dependant on substrate porosity and surface smoothness.
Apply generously and uniformly, ensuring that the surface is completely coated.
Allow to air dry.
For heavy water stained areas, prime with Mould Killing Primer and allow it to dry.
Follow with a Zinsser stain blocking primer such as BIN, BIN Advanced or Cover Stain.

Dry Time:
Mould Killing Primer dries to the touch in 30 minutes and can be recoated in 1 hour. For optimal protection, apply topcoat within 72 hours of application. Full adhesion and hardness develops in 7 days.

Limitations:
Mould Killing Primer is not designed for application to floors or decks or to surfaces subject to immersion or prolonged contact with water.

Clean-Up:
Clean all application tools with warm soapy water.
Wipe up spills immediately with a clean damp cloth.
Follow equipment manufacturer’s directions to clean spray equipment.
See label for proper container disposal.