Key features

• Colour: Gloss White.
• Gloss finish for decorative and general-purpose painting.
• Suitable for prepared wood, metal and wicker.
• Aerosol application without a separate spray gun.

Specifications

• Brand: Spraymate
• Product code: 2511
• Can size: 250ml
• Paint type: Lacquer-based spray paint
• Finish: Gloss

Preparation and application

Clean and dry the surface, removing grease, loose paint and rust. Lightly sand glossy areas before painting. Protect nearby surfaces from overspray and work outdoors or with good ventilation.

Once the mixing ball rattles, shake the can for one minute. Hold it upright, 20–30cm from the surface. Keep the can moving and apply several light coats a few minutes apart.

Follow the can label for preparation, drying and safety instructions. Keep the aerosol away from flames and other ignition sources.

What’s included

One 250ml can of Spraymate Gloss White gloss spray paint.

The post Spraypaint White Gloss 250ml | Spraymate appeared first on Do It Yourself Hardware.

Key features

• Colour: Sunshine Yellow.
• Gloss finish for decorative and general-purpose painting.
• Suitable for prepared wood, metal and wicker.
• Aerosol application without a separate spray gun.

Specifications

• Brand: Spraymate
• Product code: 2528
• Can size: 250ml
• Paint type: Lacquer-based spray paint
• Finish: Gloss

Preparation and application

Clean and dry the surface, removing grease, loose paint and rust. Lightly sand glossy areas before painting. Protect nearby surfaces from overspray and work outdoors or with good ventilation.

Once the mixing ball rattles, shake the can for one minute. Hold it upright, 20–30cm from the surface. Keep the can moving and apply several light coats a few minutes apart.

Follow the can label for preparation, drying and safety instructions. Keep the aerosol away from flames and other ignition sources.

What’s included

One 250ml can of Spraymate Sunshine Yellow gloss spray paint.

The post Spraypaint Sunshine Yellow 250ml | Spraymate appeared first on Do It Yourself Hardware.

100mm paint brush features

• Synthetic bristles with tapered tips help distribute paint evenly.
• High paint loading supports painting across wider areas.
• A stainless steel ferrule holds the bristles around the wooden handle.
• Part of Hamilton’s Perfection range, with an easy-clean bristle design.

Specifications

• Model: 9440.
• Brush width: 100mm.
• Bristle type: synthetic.
• Bristle shape: regular, straight brush.
• Handle: wood.
• Ferrule: stainless steel.

What’s included

• One 100mm Ensign Perfection paint brush.

Suitable coatings

Use this brush with compatible water-based or solvent-based paints and wood treatments. The Ensign range also suits chalk paint applications. Choose the coating for the surface and follow its preparation, application and cleaning instructions.

The post Paint brush 100mm Ensign Perfection | Hamilton’s appeared first on Do It Yourself Hardware.

Metallic gold spray paint features

• Metallic gold colour for decorative accents.
• Aerosol application for furniture details and craft projects.
• Quick-drying finish; follow the label for recoating and handling times.

Specifications

• Brand: Rust-Oleum
• Product code: 340647
• Colour: Metallic Gold
• Net contents: 312g
• Application: Interior decorative use

Application

Clean and prepare the surface before spraying. Apply several light coats, allowing the recommended drying time between coats. Follow the can label for surface compatibility, ventilation and handling.

The post Metallic gold spray paint 312g | Rust-Oleum appeared first on Do It Yourself Hardware.

3M Reflective Tape specifications

• Brand: 3M
• Range: Scotchlite conspicuity tape
• Colour: Yellow
• Width: 55mm
• Roll length: 5m
• Store SKU: 3MC000375M
• Supplier code: 3MC00037

Planning your marking

First, measure the sections you want to mark and total their lengths. Then compare that total with the 5m roll length, allowing for your planned cuts. Also check that the 55mm width suits the available surface and the placement you intend.

What’s included

• One roll of yellow 3M Scotchlite reflective tape, 55mm x 5m.

The post 3M Reflective Tape 55mm x 5m appeared first on Do It Yourself Hardware.

How Soudal Sealant Remover works

The hydrocarbon-based cleaner softens remaining sealant so you can remove it with a suitable tool or cloth. First, cut away the bulk of the cured material carefully. Then use the spray on the remaining residue, keeping the surrounding surface dry during application.

Application steps

• Work on a dry surface in dry conditions.
• Shake the aerosol thoroughly before applying it to the residue.
• Allow at least ten minutes for the product to act.
• Remove softened material with a knife, spatula or rough cloth, taking care with the underlying finish.
• Repeat the treatment if necessary.
• Finally, wash the surface thoroughly with water to help prevent surface degradation.

Surface suitability

Soudal lists aluminium, ceramic tiles, glass, coated metals, laminated board and some painted or synthetic surfaces. However, always test a small area first because paints and plastics vary. The remover can stain porous materials, and it is unsuitable for nylon or PMMA.

Specifications and handling

• Brand: SOUDAL
• Product code: 119709
• Contents: 400ml aerosol
• Appearance: Transparent liquid
• Application temperature: +5°C to +35°C

Use the product in a well-ventilated area and wear gloves and goggles. Also follow the precautions on the can before starting. If a white haze appears after drying, remove it with water and, where necessary, soap. The pack contains one 400ml can.

The post Soudal Sealant Remover 400ml appeared first on Do It Yourself Hardware.

PowaFix Alu Revive 5L key features

• Revitalises faded or chalky coatings over aluminium and fibreglass.
• Helps protect powder-coated surfaces from weather damage.
• Easy wipe-on application with no mixing required.
• Leaves a clear finish after application.
• 5L pack size for larger or repeated-use jobs.

Preparation and application

Use the product only on dry, damp-free surfaces. Clean away contamination first and make sure the existing coating is sound. Do not apply it to contaminated, unsound, damp or flaking surfaces because this can reduce performance. Shake well before use, then follow the application instructions on the container.

Storage and safety

Store the container upright in a cool place and keep the lid tightly sealed. Keep it out of reach of children and secure it during transport to reduce the risk of spills. Oil-soaked cloths, brushes and similar materials can present a spontaneous-combustion risk, so follow the manufacturer’s disposal guidance carefully. Do not reuse the empty container.

The post PowaFix Alu Revive 5L appeared first on Do It Yourself Hardware.

PowaFix Alu Revive 500ml key features

• Revitalises faded or chalky coatings over aluminium and fibreglass.
• Helps protect powder-coated surfaces from weather damage.
• Easy wipe-on application with no mixing required.
• Leaves a clear finish after application.
• 500ml pack size.

Preparation and application

Apply the product only to dry, damp-free surfaces. First remove contamination and make sure the existing coating is sound. Do not use it over contaminated, unsound, damp or flaking surfaces, because these conditions can affect performance. Shake the container well before use and follow the instructions on the pack.

Storage and safety

Keep the lid tightly sealed and store the container upright in a cool place out of reach of children. Secure it during transport to reduce the risk of spills. Oil-soaked cloths, brushes and similar materials can present a spontaneous-combustion risk, so follow the manufacturer’s disposal instructions carefully. Do not reuse the empty container and dispose of it in accordance with the product guidance.

The post PowaFix Alu Revive 500ml appeared first on Do It Yourself Hardware.

Colortone Imbuia wood stain key features

• Interior decorative wood stain with a matt finish.
• Solvent-based and thinners-based formulation.
• Lead-free product with quick-drying dye.
• Designed to enhance timber colour while retaining a natural wood appearance.
• Apply with a clean smooth cloth or paintbrush.

Preparation and application

First, remove old coatings from the wooden surface. Next, clean away dust, dirt and oil, then allow the timber to dry completely. Shake or stir the can thoroughly before use. Apply the stain with a clean smooth cloth or brush. Then allow about 15 minutes of drying time before another coat. Additional coats can be used where more colour depth is required. However, each coat should dry before the next application.

Coverage and finishing

Colortone states approximate coverage of 5 m² per 500ml. However, actual coverage varies with timber porosity, preparation and application technique. Clean the cloth or brush with thinners after use. In addition, Colortone recommends sealing the stained surface with Wood Varnish or Floor Varnish. This provides the recommended final protective finish. Wood Stain develops colour, but it is not the final protective coating in Colortone’s recommended system.

Where to use it

Use Colortone Imbuia wood stain on properly prepared interior timber such as furniture, cupboards and wooden frames. The stain is useful when you want to refresh the appearance of real wood without covering its grain with an opaque paint. However, the final shade can vary with the original timber colour, absorbency and number of coats. Therefore, test a small inconspicuous area first when colour matching is important.

Product details

• Brand: Colortone
• Colour: Imbuia
• Pack size: 500ml
• Finish: Matt
• Base: Solvent / thinners-based
• Use: Interior wooden surfaces
• Approx. drying time between coats: 15 minutes
• Approx. coverage: 5 m² per 500ml

Product imagery includes a representative 500ml Wood Stain packshot together with Colortone’s official colour swatch. The product supplied is the Imbuia 500ml variant stated in this listing.

The post Colortone Imbuia Wood Stain 500ml appeared first on Do It Yourself Hardware.

Light Oak wood stain key features

• Interior decorative wood stain with a matt finish.
• Solvent-based and thinners-based formulation.
• Lead-free product with quick-drying dye.
• Designed to enhance timber colour while retaining a natural wood appearance.
• Apply with a clean smooth cloth or paintbrush.

Preparation and application

First, remove old coatings from the wooden surface. Next, clean away dust, dirt and oil, then allow the timber to dry completely. Shake or stir the can thoroughly before use. Apply the stain with a clean smooth cloth or brush. Then allow about 15 minutes of drying time before another coat. Additional coats can be used where more colour depth is required. However, each coat should dry before the next application.

Coverage and finishing

Colortone states approximate coverage of 5 m² per 500ml. However, actual coverage varies with timber porosity, preparation and application technique. Clean the cloth or brush with thinners after use. In addition, Colortone recommends sealing the stained surface with Wood Varnish or Floor Varnish. This provides the recommended final protective finish. Wood Stain develops colour, but it is not the final protective coating in Colortone’s recommended system.

Where to use it

Use Light Oak wood stain on properly prepared interior timber such as furniture, cupboards and wooden frames. The stain is useful when you want to refresh the appearance of real wood without covering its grain with an opaque paint. However, the final shade can vary with the original timber colour, absorbency and number of coats. Therefore, test a small inconspicuous area first when colour matching is important.

Product details

• Brand: Colortone
• Colour: Light Oak
• Pack size: 500ml
• Finish: Matt
• Base: Solvent / thinners-based
• Use: Interior wooden surfaces
• Approx. drying time between coats: 15 minutes
• Approx. coverage: 5 m² per 500ml

Product imagery includes a representative 500ml Wood Stain packshot together with Colortone’s official colour swatch. The product supplied is the Light Oak 500ml variant stated in this listing.

The post Light Oak Wood Stain 500ml – Colortone appeared first on Do It Yourself Hardware.